Clino Aseptic Connections

Mini Welding Flange

CL-WFM

Connection 2

Material

Description

S = short, L = long=orbital welding; Hygiene Class H3: Super Finish inside (1.4404: Ra ≤ 0,8 µm), Hygiene Class H4: Super Finish inside (1.4435 BN2: Ra ≤ 0,4 µm), Super Finish outside (Ra ≤ 0,8 µm)

Technical data & dimensional drawing

Please select connections.

Downloads & CAD

CAD

Please select connections.

Accessories & recommendations

Single-Pin Clamps

CL-CL1

Double-Pin Clamps

CL-CL2

Mini Hose Adapter

CL-HAM

Mini Flat Clamp Gasket

CL-MG

Show all

Last visited articles

Clamp Connections to DIN 32676 CL-WF - Welding Flange

Clino Aseptic Connections

Fittings and valves for the pharmaceutical, biotechnology, food, chemical, solar and food industries must fulfil high quality and technical requirements. In addition to a high material quality, they must essentially be low in dead space, have surfaces that are easy to clean, have the correct use of sealing elements and be steam pressure sterilisable. Aseptics is another important point here - it is a precautionary measure to prevent infections and includes the sterility of instruments, system components and entire systems.

Important information on technical changes, applications, standards and guidelines

Furthermore, a distinction is generally made between 2 hygiene classes in the high-quality sector:

Hygiene class H3 with an internal Ra value of <0.8µm (material no. 1.4404 = 4L)
Hygiene class H4 with an Ra value of <0.4µm (material no. 1.4435 = 5S - Basler standard 2)

Schwer Fittings offers the following variants in its Clino® programme:

Aseptic screw connections according to DIN 11864-1
Aseptic flange connections according to DIN 11864-2
Aseptic clamp connections according to DIN 11864-3
Aseptic orbital weld fittings to DIN 11865
Aseptic orbital welding pipes according to DIN 11866
Clamp connections according to DIN 32676
Milk pipe fittings according to DIN 11851

Clino, Lebensmittel Verbindung, Tri Clamp

Ball valves, valves, sight glasses and many other accessories round off the Clino® programme from Schwer Fittings. The system is of course also available in special designs on request. Proof of quality should be provided by means of appropriate material certificates. As a rule, material certificates in accordance with TueV / DIN 3.1 are required, with chemical and physical values of the base material.

Mini Welding Flange CL-WFM

Mini Welding Flange

Description

Technical data & dimensional drawing

Downloads & CAD

CAD

Accessories & recommendations

Last visited articles

Clino Aseptic Connections

Mini Welding Flange

CL-WFM