37° JIC Flare Fittings

Products

Found: 47

Filter 47

Found: 47

Flare Nut

pC-N

with UNF Thread to ANSI B 1.1

pC-S

pC-BC-U

pC-CP

pC-SBP-U

inside hexagon with UNF-thread

Hexagon head plug

pC-SP-U

inside hexagon with UNF-thread

Lock Nut

pC-LN-U

with UNF-thread

Straight Flare Coupling 37°

pC-U

Flare Elbow 37°

pC-E

Flare Equal Tee 37°

pC-T

Flare Cross 37°

pC-C

Bulkhead Coupling 37°

pC-BU

90° Bulkhead Elbow 37°

pC-BUE

Flare Reducer 37°

pC-RU

with UNF-male thread on both sides and 37°-cone

Bulkhead Coupling 37°

pC-FBU-N

NPT(F) male thread according ANSI/ASME B 1.20.3-1976

Gauge Coupling 37°

pC-GC-G

with BSP parallel thread to EN ISO 228-1

Flare Equal Male Stud Elbow 37°

pC-MEM-OR

with metric male thread to DIN 13 positionable

Flare Equal Male Stud Elbow 37°

pC-ME-U

with UNF male thread to ANSI B 1.1 positionable

Flare Equal Male Stud Elbow 37°

pC-ME-N

with NPTF male thread to ANSI / ASME B 1.20.3-1976

Male Stud Branch Tee 37°

pC-MBT-G

with parallel thread to EN ISO 228-1, positionable

Straight Flare Coupling 37°

pC-MC-R

with tapered BSP thread to DIN 3858

Straight Flare Coupling 37°

pC-MC-G

with parallel BSP thread to EN ISO 228-1

Straight Flare Coupling 37°

pC-MCM-ES

with metric male thread to DIN 13

Straight Flare Coupling 37°

pC-MCM-OR

with metric male thread to DIN 13

Straight Flare Coupling 37°

pC-MC-N

with NPTF male thread to ANSI / ASME B 1.20.3-1976

Straight Flare Coupling 37°

pC-MC-U

with UNF male thread to ANSI B 1.1

Flare Equal Male Stud Elbow 37°

pC-ME-G

with parallel BSP thread to EN ISO 228-1, positionable

Flare Equal Male Stud Elbow 37°

pC-ME-R

with tapered BSP thread to DIN 3858

Flare Equal Male Stud Elbow 37°

pC-MEM-ES

with metric male thread to DIN 13 positionable

Bulkhead-Coupling 37°

pC-MBU-N

NPT(F) male thread according ANSI/ASME B 1.20.3-1976

Male Stud Branch Tee 37°

pC-MBT-N

with NPTF male thread to ANSI/ASME B 1.20.3-1976

Female Swivel Connector 37°

pC-SFC-R

with BSP taper thread to DIN 3858

Female Swivel Connector 37°

pC-SFC-G

with BSP parallel thread to EN ISO 228-1

Female Swivel Connector 37°

pC-SFC-U

with UNF Thread to ANSI B 1.1

Female Swivel Connector 37°

pC-SFC-M-ES

with metric male thread to DIN 13

Female Swivel Connector 37°

pC-SFC-M-OR

with metric male thread to DIN 13

Female Swivel Connector 37°

pC-SFC-N

with NPTF thread to ANSI/ASME B 1.20.3-1976

Flare Equal Female Stud Elbow 37°

pC-FE-N

with NPTF male thread to ANSI / ASME B 1.20.3-1976

Female Stud Coupling 37°

pC-FC-G

with BSP parallel thread to EN ISO 228-1

Female Stud Coupling 37°

pC-FC-N

with NPTF female thread to ANSI/ASME B 1.20.3-1976

Reducer 37°

pC-RA-U

with UNF female Thread to ANSI B 1.1

90° Swivel Elbow 37°

pC-SE-U

with UNF female Thread to ANSI B 1.1

Swivel Branch Tee 37°

pC-SBT-U

with UNF female Thread to ANSI B 1.1

Bulkhead Elbow 37°

pC-SFE-U

with UNF female-thread on the crimped nut and 37°-cone on the stud

Swivel Female Tee 37°

pC-SFT-U

with UNF female-thread on the crimped nut and 37°-cone on the stud

Swivel Run Tee 37°

pC-SRT-U

with UNF female Thread to ANSI B 1.1

Straight Flare Coupling 37°

pC-SU-U

with UNF female-thread on the crimped nut and 37°-cone on the stud

37° JIC Flare Fittings

Stainless steel flare fittings are used in areas where strong vibrations, high pressure peaks and high mechanical loads occur. Flare fittings guarantee a high level of safety in the pipe system. The main areas of application include shipbuilding, mechanical engineering, the petrochemical, offshore, paper and hydraulics industries.

Important information on technical changes, applications, standards and guidelines

The 3-part SAE union consists of a union body, union nut and support sleeve. It connects and seals the pipe flared at 37°. The sealing and retaining function to the flared pipe is purely metallic. The design of the fitting allows the use of pipes in both metric and imperial dimensions for the ranges 6 mm - 42 mm or 1/8" - 1 1/2". The fittings are manufactured from drawn or forged stainless steel with material no. 1.4401 / 1.4571 with factory acceptance certificate to DIN 50049/3.1. The pressures range from 100 to 350 bar, whereby a pressure reduction must be taken into account above +20° C. The dimensions are based on ISO 8434-2 and the SAE standards.

Advantages

Secure pipe support thanks to flare clamp
Only one separation point between the socket and pipe
High pull-out resistance due to positive-locking design
Metallic sealing point, independent of medium/temperature

Design features

The dimensions of the 37° flare fitting series are based on ISO 8434-2 and SAE standards. The 3-part fitting consists of a fitting body, union nut and support sleeve. The sealing and retaining function to the flared pipe is purely metallic. Depending on the choice of support sleeve, the union can be used for both metric and imperial pipes.

Materials

pC flare fittings are manufactured from drawn or forged 1.4401/1.4571 only with a factory acceptance certificate to DIN 50049/3.1. Special materials on request. The O-rings are made of NBR as standard for a temperature range of -40° C to +100° C. Also available in Viton® on request.

Temperature

We would like to point out that DIN 17440, Tab. 6, recommends a limit temperature of 300° C for 1.4401 and 400° C for 1.4571. For screw connections with soft seals, the limit temperatures of the elastomers must be strictly adhered to, for NBR -40° C to +100° C and Viton® -25° C to +200° C.

For your safety

Pipe connection elements are sometimes exposed to extreme loads such as vibrations and uncontrolled pressure peaks. Only the use of PressCone original components and compliance with the pc assembly regulations guarantee product safety and compliance with the applicable standards. Failure to comply with this rule may impair functional safety and invalidate the warranty.