:strip_icc():strip_exif()/cee/Documents/Produktbilder/PB_A/A-MV3-AG.jpg)
Armaturer, kuleventiler, ventiler
= 365) {
if (!$el.children[0].classList.contains('fixed')) {
$el.children[0].classList.add('fixed');
}
} else {
if ($el.children[0].classList.contains('fixed')) {
$el.children[0].classList.remove('fixed');
}
}">
Shut Off Valves with Pneumatic Actuator
Datablad
Stand 27.7.2025
- Armaturer, kuleventiler, ventiler /
- Ventiler
Shut Off Valves with Pneumatic Actuator
A-YVPAS-EBSNC
with orbital welding ends, for tubes according to DIN 11866 series B
Shut Off Valves with Pneumatic Actuator
A-YVPAS-EBSNC
with orbital welding ends, for tubes according to DIN 11866 series B
Beskrivelse av
Detaljer
Housing material AISI 316
Pilot cylinder AISI 316
Stem AISI 316L
Stem seals PTFE
Flow direction = Enter below Seat
max. operating temperature 180° C
Pilot cylinder AISI 316
Stem AISI 316L
Stem seals PTFE
Flow direction = Enter below Seat
Initial position NC = normally closed
max. operating temperature 180° C
We reserve the right to alter dimensions.
All products are developed and manufactured in accordance with Article 4.3 of the European Pressure Equipment Directive PED 2014/68/EU. Products with nominal diameters of more than 25 mm up to and including 32 mm must not be used for pumping liquid or gaseous fluids of group 1 (hazardous) according to the Pressure Equipment Directive PED 2014/68/EU. Products with nominal diameters greater than 32 mm may only be used for pumping group 2 (non-hazardous) liquid fluids according to the Pressure Equipment Directive PED 2014/68/EU. If used with other media, a review by Schwer Fittings should be requested.
Tekniske data og dimensjonstegninger
Vennligst velg tilkoblinger.
Nedlastinger og CAD
CAD
Vennligst velg tilkoblinger.