To connect a below 37° flared tube to a 24° - Inner cone, we use flared ring BV-202nd This has the corresponding cones of pipe and tube and has O-rings on both sides, so that both the tube with the 37° -flare and the connecting piece with its 24° -lnner cone can be imputed elastomeric and thus a good seal is formed. The union nut has a metric thread and can be screwed onto the normally provided for cutting ring connections threaded connector. The pipe must be crimped as in ISO 8434-2, Table 5, provided that the O-ring of the flared ring is completely covered by the flaring.
For flaring stainless steel pipes, we recommend the use of electro-hydraulic flaring with hardened or hard material-coated flaring thorns to accurately flare tubes for a functionally reliable pipe fitting.
UPS Standard: 3-4 Tage
UPS Express Saver: 1-2 Tage
Europa: 4-5 Tage / Europe: 4-5 days
Please log in with your login so you can see the price information.
As a guest, you can add items to the shopping cart and inquire.
The product has been added successfully.
The length of a hose assembly is always measured between the sealing heads or, in the case of angled fittings, between the center points of the fitting.
Minimum hose length: 250 mm
The orientation is as follows: