Ball Valve with SAE-Adapter

SAE-BVA

according to SAE J518 Code 61, ISO 6162-1 (3.000 psi) or SAE J518 Code 62, ISO 6162-2 (6.000 psi)

Your price
-,-- € / Price unit

The maximum recomended working pressure is based on the flange. The working pressure of the system is determined by the dimension of the tube (outside diameter x wall thickness), by the steel quality of the tube and by the welding. Higher pressure levels on request.

The Ball Valve consists of the components:
Housing (1.4571), Ball + Stem (1.4571), Seal (POM), Stem seal (FPM / Viton (V))
2x SAE Adapter (with o-ring groove) 1.4571
2x O-ring FPM / Viton (V)

Stem seal and o-ring also available in NBR (B)

Ball valve up to DN 25 in block design

Please select connections.

Please select connections.

Accessories and other recommendations

Delivery time

Deutschland:
UPS Standard: 3-4 Tage
UPS Express Saver: 1-2 Tage

Europa: 4-5 Tage / Europe: 4-5 days

Delivery time

Please log in with your login so you can see the price information.

As a guest, you can add items to the shopping cart and inquire.

Hose Configurator

The product has been added successfully.

Hose Length

The length of a hose assembly is always measured between the sealing heads or, in the case of angled  fittings, between the center points of the fitting.

Minimum hose length: 250 mm

Angle of Orientation

The orientation is as follows:

Language selection
Warenkorb leeren
Wollen Sie wirklich den gesamten Warenkorb leeren?