High Pressure Banjo Elbow

SR-587G

with BSP parallel thread to EN ISO 228-1, with body from square material, with metal sealing ring

Your price
-,-- € / Price unit

SR-587DK ... with edge sealing ring, see drawing above left, with elastomer seal (SR-587E. ..) on request, see drawing above right. Both suitable for tapped hole to DIN 3852/d4 small. Seal in Viton, NBR on request. The O-Ring for the groove of the flow nut will also be delivered with SR-587DK.., although the seal from the machined edge of the flow screw is sufficient; for a pure metal seal, with SR-587DK… this O-Ring can be discarded. Operational safety on male stud connection is 2.5 times the stated pressure. Operational safety on the pipe connection is 4 times the stated pressure

Please select connections.

Please select connections.

Accessories and other recommendations

Delivery time

Deutschland:
UPS Standard: 3-4 Tage
UPS Express Saver: 1-2 Tage

Europa: 4-5 Tage / Europe: 4-5 days

Delivery time

Please log in with your login so you can see the price information.

As a guest, you can add items to the shopping cart and inquire.

Hose Configurator

The product has been added successfully.

Hose Length

The length of a hose assembly is always measured between the sealing heads or, in the case of angled  fittings, between the center points of the fitting.

Minimum hose length: 250 mm

Angle of Orientation

The orientation is as follows:

Language selection
Warenkorb leeren
Wollen Sie wirklich den gesamten Warenkorb leeren?