Technical data: up to size 54 mm metal pipe (depending on system up to 108 mm) / up to 75 mm plastic pipe (depending on system up to 110 mm) Weight including battery: 3.3 kg Length: 410 mm Width: 80 mm, Height : 125 mm, Power Consumption : 400 W, Piston Force 32 kN , Piston Stroke : 40 mm battery: 18 V / 1.5 Ah Li- Ion 18 V / 3.0 Ah Li- ion Battery Capacity: 55/110 pressings , Recharge: about 30 /60 min. The pressing unit ACO202 offers technical innovations in many aspects. Thanks to the powerful rechargeable Li -Ion batteries and with half the weight compared with the previous model, twice the number pressings can be performed. Furthermore, the electronic monitoring of the jaw-raw retention bolt and the visual error indicator provide additional operational safety. In the case of errors, the logbook allows for precise and quick analysis. The reduced weight of the unit, the slim design and the higher pressing speed allow fatigue-proof working, even at tightest mounting positions. The unit is provided with an automatic sequence control, i.e right from the beginning of power build-up, pressing takes place automatically, including the return to its neutral position. At the end of a successful press cycle, the motor is switched off automatically. A manual release valve, by which the press cycle can be interrupted anytime, ensures a high degree of application safety. Advantages: Low weight, battery status indicator, visual error message, press force monitoring, Electronic monitoring of the jaw-locking-bolt, Accelerated pressing speed, range of metal 12-54 mm (depending on system up to 108 mm) , range of plastic 14-75 mm (depending on system up to 110 mm), Suitable for many known jointing clamps, Powerful lithium-battery for optimal performance.

Please select connections.

• Assembly instruction

  • Assembly instruction Aquapress compression fittings

• Technical Information

  • Technical Information Hydraulics / Pneumatics
  • Technical Information Material

Please select connections.