Regulating Valve

V-DVLG

with compression ends to EN ISO 8434-1 (DIN 2353), for sealing ring SR-500D…. in PTFE

Your price
-,-- € / Price unit

Housing Material: AISI 316, Spindle Material: AISI 304, Nut: AISI 316Ti, Spindle Seal: PTFE, Sealing Ring: PTFE. Regulating Valve: with compression ends, for sealing ring KB-K ... POM. V-DVG38M10SOR-POM. Housing: AISI 316, Spindle: AISI 304, Nut: AISI 316Ti. Spindle Seal: PTFE, Sealing Ring: POM. Operating pressure: max. 16 bar, Flow: ca. 0.1 l/min to 5 l/min. All products are developed and manufactured in accordance with Article 4.3 of the European Pressure Equipment Directive PED 2014/68/EU. Products with nominal diameters of more than 25 mm up to and including 32 mm must not be used for pumping liquid or gaseous fluids of group 1 (hazardous) according to the Pressure Equipment Directive PED 2014/68/EU. Products with nominal diameters greater than 32 mm may only be used for pumping group 2 (non-hazardous) liquid fluids according to the Pressure Equipment Directive PED 2014/68/EU. If used with other media, a review by Schwer Fittings should be requested.

Please select connections.

Please select connections.

Accessories and other recommendations

Delivery time

Deutschland:
UPS Standard: 3-4 Tage
UPS Express Saver: 1-2 Tage

Europa: 4-5 Tage / Europe: 4-5 days

Delivery time

Please log in with your login so you can see the price information.

As a guest, you can add items to the shopping cart and inquire.

Hose Configurator

The product has been added successfully.

Hose Length

The length of a hose assembly is always measured between the sealing heads or, in the case of angled  fittings, between the center points of the fitting.

Minimum hose length: 250 mm

Angle of Orientation

The orientation is as follows:

Language selection
Warenkorb leeren
Wollen Sie wirklich den gesamten Warenkorb leeren?