In plant and machinery different fittings can be used very well with a 24° cone. These include taper couplings, cutting ring, weld cone and fittings with a 24 ° cone (incl. Fittings and hose fittings).
The directional adjustable 24° sealing cone fittings are stainless and suitable for connection to threaded fittings to DIN 3853 with 24° -Inner cones.
Functionality:
The union nut is rotatably mounted on the neck of a body. The pin is thereby between two semi-circular in cross-section radial grooves of the neck and the nut and then performs the holding function of the taper coupling. The sealing is achieved by the O-ring 24 ° - Taper couplings in the range of 24 ° -lnner cone the threaded connector (bore form W to DIN 3861).
Benefits:
+ Adjustable direction by the rotatable cap nut on the neck
+ Screwed onto threaded fittings normally provided for cutting ring connections to DIN 3853
+ Small cross-sectional variation
+ Easy and quick assembly by tightening distance fixed at low torque
+ High leakage security by O-ring seal
+ High load capacity with pressure fluctuations and vibrations in the system
+ High rip out protection by interlocking construction
Deutschland:
UPS Standard: 3-4 Tage
UPS Express Saver: 1-2 Tage
Europa: 4-5 Tage / Europe: 4-5 days
Please log in with your login so you can see the price information.
As a guest, you can add items to the shopping cart and inquire.
The product has been added successfully.
The length of a hose assembly is always measured between the sealing heads or, in the case of angled fittings, between the center points of the fitting.
Minimum hose length: 250 mm
The orientation is as follows: